UK Kennedy KC3 Throwaway Milling Cutters
| Page 2
|
|
|
 Kennedy 1/16" Hss-Cobalt L/S Kc3 Throwaway Cutter UK Specification
GBP 10.99
(Indicative price - actual current price possibly lower)
Long series - inch.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Inch tolerances: diameter: over 1/16" up to 1/4". Tolerance: 0.0005, -0.0013.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155045X.
More Details : click here
SEARCH this site : click here
|
|
|
Kennedy 5Mm Hss-Cobalt B/N Kc3 Throwaway Cutter UK Specification
GBP 16
(Indicative price - actual current price possibly lower)
Ball nose - metrickennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters all of which have two flutes. Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155035X.
More Details : click here
SEARCH this site : click here
|
|
|
Kennedy 4.0Mm Tin Kc3 Throwaway Cutter UK Specification
GBP 10.88
(Indicative price - actual current price possibly lower)
Short series - metric - tin coatedkennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155086X.
More Details : click here
SEARCH this site : click here
|
|
|
Kennedy 1.0Mm Ticn Kc3 Throwaway Cutter UK Specification
GBP 12.7
(Indicative price - actual current price possibly lower)
Short series - metric - ticn coatedkennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155087X.
More Details : click here
SEARCH this site : click here
|
|
|
Kennedy 4.0Mm Tin L/S Kc3 Throwaway Cutter UK Specification
GBP 9.29
(Indicative price - actual current price possibly lower)
Long series - metric - tin coatedkennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Shank diameter: 1/4". Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155074X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 1.5Mm Tin L/S Kc3 Throwaway Cutter UK Specification
GBP 10
(Indicative price - actual current price possibly lower)
Long series - metric - tin coatedkennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Shank diameter: 1/4". Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155073X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 2.0Mm Tin Kc3 Throwaway Cutter UK Specification
GBP 10.88
(Indicative price - actual current price possibly lower)
Short series - metric - tin coatedkennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155080X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 1.5Mm Hss-Cobalt L/S Kc3 Throwaway Cutter UK Specification
GBP 7.69
(Indicative price - actual current price possibly lower)
Long series - metric.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155028X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 6.0Mm Ticn Kc3 Throwaway Cutter UK Specification
GBP 12.7
(Indicative price - actual current price possibly lower)
Short series - metric - ticn coatedkennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155094X.
More Details : click here
SEARCH this site : click here
|
|
|
Kennedy 5Mm Hss-Cobalt Kc3 Throwaway Cutter UK Specification
GBP 8.16
(Indicative price - actual current price possibly lower)
Short series - metrickennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters all of which have two flutes. Shank diameter: 1.00 6.00 6.00mm, 7.00 10.00 10.00mmmetric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155006X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 3.0Mm Tin Kc3 Throwaway Cutter UK Specification
GBP 10.88
(Indicative price - actual current price possibly lower)
Short series - metric - tin coatedkennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155078X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 6Mm Hss-Cobalt B/N Kc3 Throwaway Cutter UK Specification
GBP 13.99
(Indicative price - actual current price possibly lower)
Ball nose - metrickennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters all of which have two flutes. Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155034X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 5/32" Ticn Kc3 Throwaway Cutter UK Specification
GBP 3.36
(Indicative price - actual current price possibly lower)
Short series - inch - ticn coatedkennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Inch tolerances: diameter: over 1/16" up to 1/4". Tolerance: 0.0005, -0.0013.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155097X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 3Mm Hss-Cobalt Kc3 Throwaway Cutter UK Specification
GBP 8.16
(Indicative price - actual current price possibly lower)
Short series - metrickennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters all of which have two flutes. Shank diameter: 1.00 6.00 6.00mm, 7.00 10.00 10.00mmmetric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155007X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 10.0M Hss-Cobalt L/S Kc3 Throwaway Cutter UK Specification
GBP 11.59
(Indicative price - actual current price possibly lower)
Long series - metric.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155020X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 5.0Mm Ticn Kc3 Throwaway Cutter UK Specification
GBP 12.7
(Indicative price - actual current price possibly lower)
Short series - metric - ticn coatedkennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155090X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 10Mm Hss-Cobalt Kc3 Throwaway Cutter UK Specification
GBP 10.99
(Indicative price - actual current price possibly lower)
Short series - metrickennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters all of which have two flutes. Shank diameter: 1.00 6.00 6.00mm, 7.00 10.00 10.00mmmetric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155017X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 5.0Mm Tin Kc3 Throwaway Cutter UK Specification
GBP 10.88
(Indicative price - actual current price possibly lower)
Short series - metric - tin coatedkennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155085X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 4Mm Hss-Cobalt B/N Kc3 Throwaway Cutter UK Specification
GBP 13.99
(Indicative price - actual current price possibly lower)
Ball nose - metrickennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters all of which have two flutes. Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155036X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 1/8" Hss-Cobalt Kc3 Throwaway Cutter UK Specification
GBP 7
(Indicative price - actual current price possibly lower)
Short series - inch.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Inch tolerances: diameter: over 1/16" up to 1/4". Tolerance: 0.0005, -0.0013.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1154990X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 2.0Mm Ticn Kc3 Throwaway Cutter UK Specification
GBP 12.7
(Indicative price - actual current price possibly lower)
Short series - metric - ticn coatedkennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155093X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 4.5Mm Tin L/S Kc3 Throwaway Cutter UK Specification
GBP 10
(Indicative price - actual current price possibly lower)
Long series - metric - tin coatedkennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Shank diameter: 1/4". Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155072X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 3/16" Hss-Cobalt Kc3 Throwaway Cutter UK Specification
GBP 7
(Indicative price - actual current price possibly lower)
Short series - inch.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Inch tolerances: diameter: over 1/16" up to 1/4". Tolerance: 0.0005, -0.0013.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1154992X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 1.5Mm Ticn Kc3 Throwaway Cutter UK Specification
GBP 12.7
(Indicative price - actual current price possibly lower)
Short series - metric - ticn coatedkennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155089X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 3.5Mm Hss-Cobalt Kc3 Throwaway Cutter UK Specification
GBP 7.19
(Indicative price - actual current price possibly lower)
Short series - metrickennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters all of which have two flutes. Shank diameter: 1.00 6.00 6.00mm, 7.00 10.00 10.00mmmetric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155010X.
More Details : click here
SEARCH this site : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: UK Kennedy KC3 Throwaway Milling Cutters
|
 Copyright © UKTechnic.co.uk : 1997 - 2026 : All rights reserved. 140-UNI
|
|
