UK Iscar Grooving Inserts
|
|
|
 Iscar Dgn 2202C Insert Grade Ic 354 UK Specification
GBP 16.99
(Indicative price - actual current price possibly lower)
Dgn/dgnc/dgnm-c : used for parting of bars, hard materials and tough applications. A positive rake, single cavity with a negative land and shoulders. Medium-to-high feeds. Dgnc - with coolant holes, dgnm - single ended for very deep applications. Grade: ic354a thin pvd coated ticn layer on a p40 substarte. High toughness. For general applications in parting and grooving steel, alloy and stainless steel atmedium to high cutting speeds.Iso range - p/m/k: (p20-p40)(m10-m30)grade or coating type: pvdcoating layers: ticngrade: ic908a hard, fine grain substrate with excellent chipping resistance, combined with a new tialn pvd coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions.Iso range - p/m/k: (p15-p30)(m20-m30)(k20-k40)iso range - h/s/n: (h10-h20)(s10-s25)grade or coating type: pvdcoating layers: tialngrade: ic907a tough sub-micron substrate, tialn pvd coated. Suitable for low-to-medium cutting speeds. Developed for machining of heat resistant alloys, austenitic stainless steel and hard steel.Iso range - p/m/k: (p10-p30)(m05-m20)(k15-k30)iso range - h/s/n: (h05-h15)(s05-s20)(n05-n20)grade or coating type: pvdcoating layers: tialn tingrade: ic308a tough sub-micron pvd coated grade. Suitable forlow to medium cutting speed. Designed for machining of heat resistant alloys, austenitic stainless...
More Details : click here
SEARCH this site : click here
|
|
|
Iscar Dgr 3102C-6D Insert Grade Ic328 UK Specification
GBP 16.99
(Indicative price - actual current price possibly lower)
Dgr/l-c dgrc/lc-c: first choice for the parting of bars, hard materials and tough applications. A positive rake, single cavity with nagative land and shoulders, provides extra cutting edge strength. Medium-to-high feeds. Grade: ic354a thin pvd coated ticn layer on a p40 substarte. High toughness. For general applications in parting and grooving steel, alloy and stainless steel atmedium to high cutting speeds.Iso range - p/m/k: (p20-p40)(m10-m30)grade or coating type: pvdcoating layers: ticn ic20 (k10-k20).Uncoated carbide grade for grey cast iron over 220hbn, malleable cast iron, silicon aluminum, copper alloys. Fibre reinforced plastics (frp) phenolic laminates, stone, wood, stainless steel and high-temp resistant alloys. Suitable for finishing and medium finishing at medium speed, medium feed and interrupted cut conditions. High wear resistance.Grade: ic328a thin pvd coated ticn layer on a p45-k40 substrate. Very high toughness. For milling, parting and grooving of steel, stainless and alloy steels at low to medium cutting speeds and for unstable machining conditions.Iso range - p/m/k: (p25-p40)(m30-m40)iso range - h/s/n: (s20-s30)grade or coating type: pvdcoating layers: ticngrade: ic908a hard, fine grain substrate with excellent chipping resistance, combined with a new tialn pvd coating. Provides high wear and oxidation resistance. Recommended for a very wide range of...
More Details : click here
SEARCH this site : click here
|
|
|
|
Iscar Dgl 3102J-6D Insert Grade Ic20 UK Specification
GBP 8.44
(Indicative price - actual current price possibly lower)
Dgr/l-c dgrc/lc-c: first choice for the parting of bars, hard materials and tough applications. A positive rake, single cavity with nagative land and shoulders, provides extra cutting edge strength. Medium-to-high feeds. Grade: ic354a thin pvd coated ticn layer on a p40 substarte. High toughness. For general applications in parting and grooving steel, alloy and stainless steel atmedium to high cutting speeds.Iso range - p/m/k: (p20-p40)(m10-m30)grade or coating type: pvdcoating layers: ticn ic20 (k10-k20).Uncoated carbide grade for grey cast iron over 220hbn, malleable cast iron, silicon aluminum, copper alloys. Fibre reinforced plastics (frp) phenolic laminates, stone, wood, stainless steel and high-temp resistant alloys. Suitable for finishing and medium finishing at medium speed, medium feed and interrupted cut conditions. High wear resistance.Grade: ic328a thin pvd coated ticn layer on a p45-k40 substrate. Very high toughness. For milling, parting and grooving of steel, stainless and alloy steels at low to medium cutting speeds and for unstable machining conditions.Iso range - p/m/k: (p25-p40)(m30-m40)iso range - h/s/n: (s20-s30)grade or coating type: pvdcoating layers: ticngrade: ic908a hard, fine grain substrate with excellent chipping resistance, combined with a new tialn pvd coating. Provides high wear and oxidation resistance. Recommended for a very wide range of...
More Details : click here
SEARCH this site : click here
|
|
|
Iscar Wolh 05T304-Sw Insert Grade Ic328 UK Specification
GBP 10.3
(Indicative price - actual current price possibly lower)
Wolh-sw: inserts for dz drills with serrated cutting edges and a wide chipformer, for chip splitting at medium-to-high feeds.Grade: ic328a thin pvd coated ticn layer on a p45-k40 substrate. Very high toughness. For milling, parting and grooving of steel, stainless and alloy steels at low to medium cutting speeds and for unstable machining conditions.Iso range - p/m/k: (p25-p40)(m30-m40)iso range - h/s/n: (s20-s30)grade or coating type: pvdcoating layers: ticngrade: ic908a hard, fine grain substrate with excellent chipping resistance, combined with a new tialn pvd coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions.Iso range - p/m/k: (p15-p30)(m20-m30)(k20-k40)iso range - h/s/n: (h10-h20)(s10-s25)grade or coating type: pvdcoating layers: tialn. High specification grooving inserts by Iscar, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1127420X.
More Details : click here
SEARCH this site : click here
|
|
|
Iscar Grip 5008Y Insert Grade I C8250 UK Specification
GBP 22
(Indicative price - actual current price possibly lower)
Grip : double-ended inserts, for turning & grooving in external, internal and face applications. Grade: ic08an uncoated fine grain, carbide grade. Used mainly for aluminum and for high temperature alloys at low to medium cutting speed.Iso range - p/m/k: (m20-m30)iso range - h/s/n: (s10-s30)(n10-n20)grade or coating type: un-coatedcoating layers: uncoated grade: ic354a thin pvd coated ticn layer on a p40 substarte. High toughness. For general applications in parting and grooving steel, alloy and stainless steel atmedium to high cutting speeds.Iso range - p/m/k: (p20-p40)(m10-m30)grade or coating type: pvdcoating layers: ticngrade: ic908a hard, fine grain substrate with excellent chipping resistance, combined with a new tialn pvd coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions.Iso range - p/m/k: (p15-p30)(m20-m30)(k20-k40)iso range - h/s/n: (h10-h20)(s10-s25)grade or coating type: pvdcoating layers: tialngrade: ic9025.A tough substrate with a cobalt enriched layer combined with mtcvd ticn and a thick alpha al2o3 cvdcoating. Recommended for general use machining ofsteel in a wide range of conditions, featuring high toughness and wear resistance.Iso range - p/m/k: (p20-p30)(m15-m30)grade or coating type: cvdcoating layers: ticn al2o3 tingrade: ic808a hard, fine grain substrate with...
More Details : click here
SEARCH this site : click here
|
|
|
|
Iscar Grip 3002Y Insert Grade I C354 UK Specification
GBP 17.99
(Indicative price - actual current price possibly lower)
Grip : double-ended inserts, for turning & grooving in external, internal and face applications. Grade: ic08an uncoated fine grain, carbide grade. Used mainly for aluminum and for high temperature alloys at low to medium cutting speed.Iso range - p/m/k: (m20-m30)iso range - h/s/n: (s10-s30)(n10-n20)grade or coating type: un-coatedcoating layers: uncoated grade: ic354a thin pvd coated ticn layer on a p40 substarte. High toughness. For general applications in parting and grooving steel, alloy and stainless steel atmedium to high cutting speeds.Iso range - p/m/k: (p20-p40)(m10-m30)grade or coating type: pvdcoating layers: ticngrade: ic908a hard, fine grain substrate with excellent chipping resistance, combined with a new tialn pvd coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions.Iso range - p/m/k: (p15-p30)(m20-m30)(k20-k40)iso range - h/s/n: (h10-h20)(s10-s25)grade or coating type: pvdcoating layers: tialngrade: ic9025.A tough substrate with a cobalt enriched layer combined with mtcvd ticn and a thick alpha al2o3 cvdcoating. Recommended for general use machining ofsteel in a wide range of conditions, featuring high toughness and wear resistance.Iso range - p/m/k: (p20-p30)(m15-m30)grade or coating type: cvdcoating layers: ticn al2o3 tingrade: ic808a hard, fine grain substrate with...
More Details : click here
SEARCH this site : click here
|
|
|
|
Iscar Grip 4002Y Insert Grade I C908 UK Specification
GBP 19.3
(Indicative price - actual current price possibly lower)
Grip : double-ended inserts, for turning & grooving in external, internal and face applications. Grade: ic08an uncoated fine grain, carbide grade. Used mainly for aluminum and for high temperature alloys at low to medium cutting speed.Iso range - p/m/k: (m20-m30)iso range - h/s/n: (s10-s30)(n10-n20)grade or coating type: un-coatedcoating layers: uncoated grade: ic354a thin pvd coated ticn layer on a p40 substarte. High toughness. For general applications in parting and grooving steel, alloy and stainless steel atmedium to high cutting speeds.Iso range - p/m/k: (p20-p40)(m10-m30)grade or coating type: pvdcoating layers: ticngrade: ic908a hard, fine grain substrate with excellent chipping resistance, combined with a new tialn pvd coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions.Iso range - p/m/k: (p15-p30)(m20-m30)(k20-k40)iso range - h/s/n: (h10-h20)(s10-s25)grade or coating type: pvdcoating layers: tialngrade: ic9025.A tough substrate with a cobalt enriched layer combined with mtcvd ticn and a thick alpha al2o3 cvdcoating. Recommended for general use machining ofsteel in a wide range of conditions, featuring high toughness and wear resistance.Iso range - p/m/k: (p20-p30)(m15-m30)grade or coating type: cvdcoating layers: ticn al2o3 tingrade: ic808a hard, fine grain substrate with...
More Details : click here
SEARCH this site : click here
|
|
|
|
Iscar Grip 4004Y Insert Grade I C808 UK Specification
GBP 19.3
(Indicative price - actual current price possibly lower)
Grip : double-ended inserts, for turning & grooving in external, internal and face applications. Grade: ic08an uncoated fine grain, carbide grade. Used mainly for aluminum and for high temperature alloys at low to medium cutting speed.Iso range - p/m/k: (m20-m30)iso range - h/s/n: (s10-s30)(n10-n20)grade or coating type: un-coatedcoating layers: uncoated grade: ic354a thin pvd coated ticn layer on a p40 substarte. High toughness. For general applications in parting and grooving steel, alloy and stainless steel atmedium to high cutting speeds.Iso range - p/m/k: (p20-p40)(m10-m30)grade or coating type: pvdcoating layers: ticngrade: ic908a hard, fine grain substrate with excellent chipping resistance, combined with a new tialn pvd coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions.Iso range - p/m/k: (p15-p30)(m20-m30)(k20-k40)iso range - h/s/n: (h10-h20)(s10-s25)grade or coating type: pvdcoating layers: tialngrade: ic9025.A tough substrate with a cobalt enriched layer combined with mtcvd ticn and a thick alpha al2o3 cvdcoating. Recommended for general use machining ofsteel in a wide range of conditions, featuring high toughness and wear resistance.Iso range - p/m/k: (p20-p30)(m15-m30)grade or coating type: cvdcoating layers: ticn al2o3 tingrade: ic808a hard, fine grain substrate with...
More Details : click here
SEARCH this site : click here
|
|
|
|
Iscar Dgr 2202C-6D Insert Grade Ic354 UK Specification
GBP 16.99
(Indicative price - actual current price possibly lower)
Dgr/l-c dgrc/lc-c: first choice for the parting of bars, hard materials and tough applications. A positive rake, single cavity with nagative land and shoulders, provides extra cutting edge strength. Medium-to-high feeds. Grade: ic354a thin pvd coated ticn layer on a p40 substarte. High toughness. For general applications in parting and grooving steel, alloy and stainless steel atmedium to high cutting speeds.Iso range - p/m/k: (p20-p40)(m10-m30)grade or coating type: pvdcoating layers: ticn ic20 (k10-k20).Uncoated carbide grade for grey cast iron over 220hbn, malleable cast iron, silicon aluminum, copper alloys. Fibre reinforced plastics (frp) phenolic laminates, stone, wood, stainless steel and high-temp resistant alloys. Suitable for finishing and medium finishing at medium speed, medium feed and interrupted cut conditions. High wear resistance.Grade: ic328a thin pvd coated ticn layer on a p45-k40 substrate. Very high toughness. For milling, parting and grooving of steel, stainless and alloy steels at low to medium cutting speeds and for unstable machining conditions.Iso range - p/m/k: (p25-p40)(m30-m40)iso range - h/s/n: (s20-s30)grade or coating type: pvdcoating layers: ticngrade: ic908a hard, fine grain substrate with excellent chipping resistance, combined with a new tialn pvd coating. Provides high wear and oxidation resistance. Recommended for a very wide range of...
More Details : click here
SEARCH this site : click here
|
|
|
|
Iscar Dgn 2002C Insert Grade Ic 354 UK Specification
GBP 16.99
(Indicative price - actual current price possibly lower)
Dgn/dgnc/dgnm-c : used for parting of bars, hard materials and tough applications. A positive rake, single cavity with a negative land and shoulders. Medium-to-high feeds. Dgnc - with coolant holes, dgnm - single ended for very deep applications. Grade: ic354a thin pvd coated ticn layer on a p40 substarte. High toughness. For general applications in parting and grooving steel, alloy and stainless steel atmedium to high cutting speeds.Iso range - p/m/k: (p20-p40)(m10-m30)grade or coating type: pvdcoating layers: ticngrade: ic908a hard, fine grain substrate with excellent chipping resistance, combined with a new tialn pvd coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions.Iso range - p/m/k: (p15-p30)(m20-m30)(k20-k40)iso range - h/s/n: (h10-h20)(s10-s25)grade or coating type: pvdcoating layers: tialngrade: ic907a tough sub-micron substrate, tialn pvd coated. Suitable for low-to-medium cutting speeds. Developed for machining of heat resistant alloys, austenitic stainless steel and hard steel.Iso range - p/m/k: (p10-p30)(m05-m20)(k15-k30)iso range - h/s/n: (h05-h15)(s05-s20)(n05-n20)grade or coating type: pvdcoating layers: tialn tingrade: ic308a tough sub-micron pvd coated grade. Suitable forlow to medium cutting speed. Designed for machining of heat resistant alloys, austenitic stainless...
More Details : click here
SEARCH this site : click here
|
|
|
Iscar Penta 24N300J150 Insert Grade Ic908 UK Specification
GBP 40
(Indicative price - actual current price possibly lower)
Iscar has developed a new insert designated pentacut, with 5 cutting edges, for multifunction applications including grooving, parting, recessing and chamfering. This cost effective insert is designed to perform shallow grooving operations and parting of small solid bars up to 12.5 mm in diameter. Each cutting edge on the pentagonal shaped insert is equipped with a unique j-type positive chipformer that provides excellent chip control in grooving, parting and recessing (light side turning) applications.For all dimensional and technical specifications please refer to our catalogue. High specification grooving inserts by Iscar, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1127320X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Iscar Wolh 05T304-Sw Insert Grade Ic908 UK Specification
GBP 10.3
(Indicative price - actual current price possibly lower)
Wolh-sw: inserts for dz drills with serrated cutting edges and a wide chipformer, for chip splitting at medium-to-high feeds.Grade: ic328a thin pvd coated ticn layer on a p45-k40 substrate. Very high toughness. For milling, parting and grooving of steel, stainless and alloy steels at low to medium cutting speeds and for unstable machining conditions.Iso range - p/m/k: (p25-p40)(m30-m40)iso range - h/s/n: (s20-s30)grade or coating type: pvdcoating layers: ticngrade: ic908a hard, fine grain substrate with excellent chipping resistance, combined with a new tialn pvd coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions.Iso range - p/m/k: (p15-p30)(m20-m30)(k20-k40)iso range - h/s/n: (h10-h20)(s10-s25)grade or coating type: pvdcoating layers: tialn. High specification grooving inserts by Iscar, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1127419X.
More Details : click here
SEARCH this site : click here
|
|
|
Iscar Dgn 2202C Insert Grade Ic 20 UK Specification
GBP 13.39
(Indicative price - actual current price possibly lower)
Ic20 (k10-k20).Uncoated carbide grade for grey cast iron over 220hbn, malleable cast iron, silicon aluminum, copper alloys. Fibre reinforced plastics (frp) phenolic laminates, stone, wood, stainless steel and high-temp resistant alloys. Suitable for finishing and medium finishing at medium speed, medium feed and interrupted cut conditions. High wear resistance. High specification grooving inserts by Iscar, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1127318X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Iscar Penta 24N300J020 Insert Grade Ic908 UK Specification
GBP 37
(Indicative price - actual current price possibly lower)
Iscar has developed a new insert designated pentacut, with 5 cutting edges, for multifunction applications including grooving, parting, recessing and chamfering. This cost effective insert is designed to perform shallow grooving operations and parting of small solid bars up to 12.5 mm in diameter. Each cutting edge on the pentagonal shaped insert is equipped with a unique j-type positive chipformer that provides excellent chip control in grooving, parting and recessing (light side turning) applications.For all dimensional and technical specifications please refer to our catalogue. High specification grooving inserts by Iscar, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1127344X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Iscar Penta 24N200J100 Insert Grade Ic908 UK Specification
GBP 37.99
(Indicative price - actual current price possibly lower)
Iscar has developed a new insert designated pentacut, with 5 cutting edges, for multifunction applications including grooving, parting, recessing and chamfering. This cost effective insert is designed to perform shallow grooving operations and parting of small solid bars up to 12.5 mm in diameter. Each cutting edge on the pentagonal shaped insert is equipped with a unique j-type positive chipformer that provides excellent chip control in grooving, parting and recessing (light side turning) applications.For all dimensional and technical specifications please refer to our catalogue. High specification grooving inserts by Iscar, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1127335X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Iscar Dgn 6303J Insert Grade Ic 908 UK Specification
GBP 22
(Indicative price - actual current price possibly lower)
Tialn pvd coated grade giving very high toughness for interrupted cutting. Excellent notch wear and built-up edge resistance. Low to medium speed. Suitable for use on carbon, alloy and stainless steels. High specification grooving inserts by Iscar, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1127307X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Iscar Penta 24N200J020 Insert Grade Ic1008 UK Specification
GBP 31.39
(Indicative price - actual current price possibly lower)
Iscar has developed a new insert designated pentacut, with 5 cutting edges, for multifunction applications including grooving, parting, recessing and chamfering. This cost effective insert is designed to perform shallow grooving operations and parting of small solid bars up to 12.5 mm in diameter. Each cutting edge on the pentagonal shaped insert is equipped with a unique j-type positive chipformer that provides excellent chip control in grooving, parting and recessing (light side turning) applications.For all dimensional and technical specifications please refer to our catalogue. High specification grooving inserts by Iscar, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1127331X.
More Details : click here
SEARCH this site : click here
|
|
|
Iscar Penta 34F247-0.20-22R Insert Grade Ic908 UK Specification
GBP 49.99
(Indicative price - actual current price possibly lower)
Penta 34f-r/l pentagonal inserts for face grooving and recessing up to 5 mm depth of cut at a minimum 22 mm diameter.Designation: penta 34f247-0.20-22r.Grade: ic908.A hard, fine grain substrate with excellent chipping resistance, combined with a new tialn pvd coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions.Iso range - p/m/k: (p15-p30)(m20-m30)(k20-k40).Iso range - h/s/n: (h10-h20)(s10-s25).Grade or coating type: pvd.Coating layers: tialn. High specification grooving inserts by Iscar, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1127423X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Iscar Penta 24N150J010 Insert Grade Ic1008 UK Specification
GBP 31.39
(Indicative price - actual current price possibly lower)
Iscar has developed a new insert designated pentacut, with 5 cutting edges, for multifunction applications including grooving, parting, recessing and chamfering. This cost effective insert is designed to perform shallow grooving operations and parting of small solid bars up to 12.5 mm in diameter. Each cutting edge on the pentagonal shaped insert is equipped with a unique j-type positive chipformer that provides excellent chip control in grooving, parting and recessing (light side turning) applications.For all dimensional and technical specifications please refer to our catalogue. High specification grooving inserts by Iscar, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1127329X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Iscar Dgn 3102C Insert Grade Ic 354 UK Specification
GBP 16.99
(Indicative price - actual current price possibly lower)
Dgn/dgnc/dgnm-c : used for parting of bars, hard materials and tough applications. A positive rake, single cavity with a negative land and shoulders. Medium-to-high feeds. Dgnc - with coolant holes, dgnm - single ended for very deep applications. Grade: ic354a thin pvd coated ticn layer on a p40 substarte. High toughness. For general applications in parting and grooving steel, alloy and stainless steel atmedium to high cutting speeds.Iso range - p/m/k: (p20-p40)(m10-m30)grade or coating type: pvdcoating layers: ticngrade: ic908a hard, fine grain substrate with excellent chipping resistance, combined with a new tialn pvd coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions.Iso range - p/m/k: (p15-p30)(m20-m30)(k20-k40)iso range - h/s/n: (h10-h20)(s10-s25)grade or coating type: pvdcoating layers: tialngrade: ic907a tough sub-micron substrate, tialn pvd coated. Suitable for low-to-medium cutting speeds. Developed for machining of heat resistant alloys, austenitic stainless steel and hard steel.Iso range - p/m/k: (p10-p30)(m05-m20)(k15-k30)iso range - h/s/n: (h05-h15)(s05-s20)(n05-n20)grade or coating type: pvdcoating layers: tialn tingrade: ic308a tough sub-micron pvd coated grade. Suitable forlow to medium cutting speed. Designed for machining of heat resistant alloys, austenitic stainless...
More Details : click here
SEARCH this site : click here
|
|
|
|
Iscar Dgr 3102C-6D Insert Grade Ic908 UK Specification
GBP 16.99
(Indicative price - actual current price possibly lower)
Dgr/l-c dgrc/lc-c: first choice for the parting of bars, hard materials and tough applications. A positive rake, single cavity with nagative land and shoulders, provides extra cutting edge strength. Medium-to-high feeds. Grade: ic354a thin pvd coated ticn layer on a p40 substarte. High toughness. For general applications in parting and grooving steel, alloy and stainless steel atmedium to high cutting speeds.Iso range - p/m/k: (p20-p40)(m10-m30)grade or coating type: pvdcoating layers: ticn ic20 (k10-k20).Uncoated carbide grade for grey cast iron over 220hbn, malleable cast iron, silicon aluminum, copper alloys. Fibre reinforced plastics (frp) phenolic laminates, stone, wood, stainless steel and high-temp resistant alloys. Suitable for finishing and medium finishing at medium speed, medium feed and interrupted cut conditions. High wear resistance.Grade: ic328a thin pvd coated ticn layer on a p45-k40 substrate. Very high toughness. For milling, parting and grooving of steel, stainless and alloy steels at low to medium cutting speeds and for unstable machining conditions.Iso range - p/m/k: (p25-p40)(m30-m40)iso range - h/s/n: (s20-s30)grade or coating type: pvdcoating layers: ticngrade: ic908a hard, fine grain substrate with excellent chipping resistance, combined with a new tialn pvd coating. Provides high wear and oxidation resistance. Recommended for a very wide range of...
More Details : click here
SEARCH this site : click here
|
|
|
|
Iscar Penta 24N150J010 Insert Grade Ic908 UK Specification
GBP 35.99
(Indicative price - actual current price possibly lower)
Iscar has developed a new insert designated pentacut, with 5 cutting edges, for multifunction applications including grooving, parting, recessing and chamfering. This cost effective insert is designed to perform shallow grooving operations and parting of small solid bars up to 12.5 mm in diameter. Each cutting edge on the pentagonal shaped insert is equipped with a unique j-type positive chipformer that provides excellent chip control in grooving, parting and recessing (light side turning) applications.For all dimensional and technical specifications please refer to our catalogue. High specification grooving inserts by Iscar, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1127328X.
More Details : click here
SEARCH this site : click here
|
|
|
Iscar Qc95Mt 100504Sm Insert Grade Ic9025 UK Specification
GBP 3.6
(Indicative price - actual current price possibly lower)
Qc95mt-sm 7 clearance insert with four 80 corners used for finishing applications (part of the chameleon multifunction system).Designation: qc95mt 100504-sm.Grade: ic9025high toughness and wear resistance.Iso range - p/m/k: (p20-p30)(m15-m30) grade or coating type: cvdcoating layers: ticn al2o3 tin. High specification grooving inserts by Iscar, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1127425X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Iscar Dgn 4003C Insert Grade Ic 354 UK Specification
GBP 17.99
(Indicative price - actual current price possibly lower)
Dgn/dgnc/dgnm-c : used for parting of bars, hard materials and tough applications. A positive rake, single cavity with a negative land and shoulders. Medium-to-high feeds. Dgnc - with coolant holes, dgnm - single ended for very deep applications. Grade: ic354a thin pvd coated ticn layer on a p40 substarte. High toughness. For general applications in parting and grooving steel, alloy and stainless steel atmedium to high cutting speeds.Iso range - p/m/k: (p20-p40)(m10-m30)grade or coating type: pvdcoating layers: ticngrade: ic908a hard, fine grain substrate with excellent chipping resistance, combined with a new tialn pvd coating. Provides high wear and oxidation resistance. Recommended for a very wide range of materials applications and machining conditions.Iso range - p/m/k: (p15-p30)(m20-m30)(k20-k40)iso range - h/s/n: (h10-h20)(s10-s25)grade or coating type: pvdcoating layers: tialngrade: ic907a tough sub-micron substrate, tialn pvd coated. Suitable for low-to-medium cutting speeds. Developed for machining of heat resistant alloys, austenitic stainless steel and hard steel.Iso range - p/m/k: (p10-p30)(m05-m20)(k15-k30)iso range - h/s/n: (h05-h15)(s05-s20)(n05-n20)grade or coating type: pvdcoating layers: tialn tingrade: ic308a tough sub-micron pvd coated grade. Suitable forlow to medium cutting speed. Designed for machining of heat resistant alloys, austenitic stainless...
More Details : click here
SEARCH this site : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: UK Iscar Grooving Inserts
|
 Copyright © UKTechnic.co.uk : 1997 - 2026 : All rights reserved. 140-UNI
|
|
