Kennedy 3/32" Hss-Cobalt Kc3 Throwaway Cutter UK Specification
Kennedy KC3 Throwaway Milling Cutters in UK specification
|
Short series - inch.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Inch tolerances: diameter: over 1/16" up to 1/4". Tolerance: 0.0005, -0.0013.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1154993X.
 Indicative Price: GBP 7
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more high specification UK technical products : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Kennedy 5/32" Ticn Kc3 Throwaway Cutter UK Specification
GBP 3.36
(Indicative price - actual current price possibly lower)
UK Kennedy KC3 Throwaway Milling Cutters
Short series - inch - ticn coatedkennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Inch tolerances: diameter: over 1/16" up to 1/4". Tolerance: 0.0005, -0.0013.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155097X.
More Details : click here
SEARCH this site : click here
|
|
|
Kennedy 5.5Mm Tin L/S Kc3 Throwaway Cutter UK Specification
GBP 9.59
(Indicative price - actual current price possibly lower)
UK Kennedy KC3 Throwaway Milling Cutters
Long series - metric - tin coatedkennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Shank diameter: 1/4". Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155067X.
More Details : click here
SEARCH this site : click here
|
|
|
Kennedy 1/16" Hss-Cobalt B/N Kc3 Throwaway Cutter UK Specification
GBP 16.19
(Indicative price - actual current price possibly lower)
UK Kennedy KC3 Throwaway Milling Cutters
Ball nose - inch.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Inch tolerances: diameter: over 1/16" up to 1/4". Tolerance: 0.0005, -0.0013.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1154999X.
More Details : click here
SEARCH this site : click here
|
|
|
Kennedy 1.5Mm Tin Kc3 Throwaway Cutter UK Specification
GBP 10.88
(Indicative price - actual current price possibly lower)
UK Kennedy KC3 Throwaway Milling Cutters
Short series - metric - tin coatedkennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155083X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 2.5Mm Hss-Cobalt B/N Kc3 Throwaway Cutter UK Specification
GBP 13.99
(Indicative price - actual current price possibly lower)
UK Kennedy KC3 Throwaway Milling Cutters
Ball nose - metrickennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters all of which have two flutes. Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155031X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 3/32" Hss-Cobalt B/N Kc3 Throwaway Cutter UK Specification
GBP 16.19
(Indicative price - actual current price possibly lower)
UK Kennedy KC3 Throwaway Milling Cutters
Ball nose - inch.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Inch tolerances: diameter: over 1/16" up to 1/4". Tolerance: 0.0005, -0.0013.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155002X.
More Details : click here
SEARCH this site : click here
|
|
|
Kennedy 6Mm Hss-Cobalt L/S Kc3 Throwaway Cutter UK Specification
GBP 7.69
(Indicative price - actual current price possibly lower)
UK Kennedy KC3 Throwaway Milling Cutters
Long series - metric.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155021X.
More Details : click here
SEARCH this site : click here
|
|
|
Kennedy 1Mm Hss-Cobalt Kc3 Throwaway Cutter UK Specification
GBP 8.16
(Indicative price - actual current price possibly lower)
UK Kennedy KC3 Throwaway Milling Cutters
Short series - metrickennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters all of which have two flutes. Shank diameter: 1.00 6.00 6.00mm, 7.00 10.00 10.00mmmetric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155012X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 4.5Mm Hss-Cobalt L/S Kc3 Throwaway Cutter UK Specification
GBP 8.09
(Indicative price - actual current price possibly lower)
UK Kennedy KC3 Throwaway Milling Cutters
Long series - metric.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters all of which have two flutes.Metric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155022X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 6Mm Hss-Cobalt Kc3 Throwaway Cutter UK Specification
GBP 8.16
(Indicative price - actual current price possibly lower)
UK Kennedy KC3 Throwaway Milling Cutters
Short series - metrickennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters all of which have two flutes. Shank diameter: 1.00 6.00 6.00mm, 7.00 10.00 10.00mmmetric tolerances: diameter: over 1.00 up to 3.00. Tolerance: 0.013, -0.033.Diameter: over 3.00 up to 6.00. Tolerance: 0.020, -0.020.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155015X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 7/32" Ticn Kc3 Throwaway Cutter UK Specification
GBP 4.98
(Indicative price - actual current price possibly lower)
UK Kennedy KC3 Throwaway Milling Cutters
Short series - inch - ticn coatedkennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Inch tolerances: diameter: over 1/16" up to 1/4". Tolerance: 0.0005, -0.0013.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155096X.
More Details : click here
SEARCH this site : click here
|
|
|
|
Kennedy 7/32" Hss-Cobalt B/N Kc3 Throwaway Cutter UK Specification
GBP 18.46
(Indicative price - actual current price possibly lower)
UK Kennedy KC3 Throwaway Milling Cutters
Ball nose - inch.Kennedy kc3 throwaway 3 flute endmills are manufactured hss-co 5% making them much tougher than hss. This means that kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.Inch tolerances: diameter: over 1/16" up to 1/4". Tolerance: 0.0005, -0.0013.Kennedy kc3 endmills are available uncoated, tin coated and ticn coated.Tin (titanium nitride) provides a surface hardness in the region of 2300hv which offers improved wear resistance, tool life and productivity.Ticn (titanium carbonitride) gives a surface hardness in the region of 3000-3500 hv, excellent wear resistance and good heat resistance. This coating is used for the same things as tin but also for hard steels, stainless, cast iron, brass & bronze. High specification kc3 throwaway milling cutters by Kennedy, buy online with confidence at best discount price and fast shipping to U.K. and Europe. UK distributor product ID ZT1155000X.
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Kennedy 3/32" Hss-Cobalt Kc3 Throwaway Cutter UK Specification
|
 Copyright © UKTechnic.co.uk : 1997 - 2026 : All rights reserved. 140-UNI
|
|
